Filter
Top Products
Print Speed: 2.5 ips (64 mm) default for all serial bar
codes, 4.0 ips (102 mm), 6.0 ips (152 mm)
default for parallel bar codes, 8.0 ips (203
mm), and 10.0 ips (254 mm). 12.0 ips (305
mm) printing is an option that must be
purchased separately.
See Chapter 8, "Printing" for special
considerations when printing at speeds
greater than 6.0 ips.
Maximum Print
Area:
4.0 inches x 16.0 inches (102 mm x 406 mm)
with 203 dpi
4.0 inches x 13.0 inches (102 mm x 330 mm)
with 300 dpi
Tag Cut Dimensions
Use these specifications for the 926 Knife.
Widths: 0.75 inches to 4.0 inches (19 mm to 102 mm)
Lengths: 1.2 inches to 16.0 inches (30 mm to 406 mm)
NOTE: The maximum cut tag length using
the stacker is 3.66 inches (93 mm).
Thickness: 7 mils to 10 mils
Cut Angle: 5 degrees (plus or minus) from 90 degrees
with respect to the edge.
Batch Separator: 3.66 inches (93 mm)
A-2
Specifications