Filter
Top Products
Baud Rate
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. If password protection in enabled,
press Feed/Cut three times, then press Enter/Pause before you
see the Setup Menu options. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
Baud Rate r
2. Press Enter/Pause. The current setting is displayed, for
example:
BAUD RATE
l 9600 r
3. Press l or r to display the baud rate you need, then press
Enter/Pause. Press Escape/Clear until you see the Main
Menu.
Word Length
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
l Word Length r
2. Press Enter/Pause. The current setting is displayed, for
example:
WORD LENGTH
l 8
5-2
Communication Values