Filter
Top Products
Supplies
For high temperature or high humidity environments, contact
Paxar for supply recommendations. Continuous (non-indexed)
supply does not have perforations or black marks and must be
used in continuous mode. We recommend using continuous
supply with a tear bar or the optional knife. If you purchased the
optional knife, you cannot use the tear bar. Aperture supplies are
tags or labels with holes (or openings) in them. The supply is
sensed using the holes. The holes can be only on the edge or in
the center of the supply.
Supply Types: Thermal Transfer or Direct
Supply Widths: 0.75 inches (19 mm) minimum
4.25 inches (108 mm) maximum
Supply Lengths: 0.32 inch (8 mm) minimum
0.75 inch (19 mm) minimum for tags
1.2 inches (30 mm) minimum for cutting tags
17.5 inches (445 mm) maximum
Total Thickness: 7 to 12 mils
7 to 10 mils with the optional knife
Center Aperture
Edge Aperture
Specifications
A-3