Filter
Top Products
Special Printing Considerations
Keep in mind the following special printing considerations.
Maximum
Print Speed
Printing Method Printhead
Density
Knife Peel Mode
2.5/4.0/6.0
ips (inches
per second)
Thermal Direct
Thermal Transfer
203/300 dpi
dots per inch
Supported Supported
8.0 ips Thermal Direct
Thermal Transfer
203/300 dpi Not
Supported
Supported
10.0 ips Thermal
Direct/Thermal
Transfer
203 dpi only Not
Supported
Not
Supported
12.0* ips Thermal
Direct/Thermal
Transfer
203 dpi only Not
Supported
Not
Supported
* 12.0 ips is the high speed option, which must be purchased
separately.
◆
The minimum label feed length is 0.75 inches (19 mm) using
8.0 ips or higher.
◆
94x5 emulation is not supported using 300 dpi.
◆
The maximum supply and image length with the optional 300
dpi printhead is 12.0 inches (305 mm).
◆
You may need to clean the printhead and platen roller more
frequently when printing at high speeds. See Chapter 9,
"Care and Maintenance," for more information.
8-8
Printing