Filter
Top Products
9. Close the exit cover.
10. Load supplies by following the label loading procedures. You
may notice a different color and texture on the platen roller.
Linerless supplies do not stick to the textured platen roller.
11. Close the printhead assembly and the cover.
12. Turn on the printer.
13. Verify the alignment of the platen roller with the peel bar or
shelf. Press Feed/Cut to position the supply under the
printhead.
Using String Tag Supply
String tags are used in a variety of applications, such as jewelry
tags and item marking.
String Tag Considerations
◆
Thermal direct printing, fan-fold supplies, and the knife are not
supported with string tags.
◆
The maximum print speed with string tags is 6.0 inches per
second (ips).
◆
A non-print zone of 0.250 inches (6.4 mm) exists on the string
side of the tag.
◆
Use the wide setting for string tags.
Loading Supplies
2-13