Filter
Top Products
Low Battery
Anytime you store the printer, keep a handle attached to
maintain the memory. However, you may need to recharge the
handle
before
the printer can be operated.
While you are using the printer, the printer beeps when the
power is low, and displays a message:
RECHARGE
Turn the power off, switch to a fully charged handle, and
recharge the used one. To ensure maximum print quality,
switch to a fully charged handle for every roll of supply that is
printed.
Factors Affecting a Charge
Here are a few factors which affect how long a charge will last.
• The amount of information printed on each label. More
energy is required to print a label with 10 fields than to
print a label with 4 fields.
• When the handle is not in use and is not recharging, the
handle loses 2 - 3% of its charge per day.
• Environments with extreme heat or cold will increase or
decrease the discharge rate.
During short term storage, you should keep the handle
recharging. This way, the printer is ready for immediate use
the next time you need it.
2. Getting Started
5