Filter
Top Products
5. Care and Maintenance
This chapter contains:
• Clearing the Supply and Backing Paper Tracks
• Checking the Label Chute for Stuck Labels
(when using label supplies only)
• Cleaning the Print Head and Platen Roller
Clearing the Supply and Backing Paper Tracks
1. Push the power switch off.
2. Squeeze the tabs (Figure 8) on the dust cover and rotate it
open until it locks.
3. Remove the roll of supply.
4. Squeeze the side tabs on the supply holder and rotate it
open.
Dust
Cover
Tabs
Supply Holder
Side Tabs
Power
Switch
Figure 8
41