Filter
Top Products
Removing Supplies
1. Open the dust cover until it locks (Figure 6).
2. Tear evenly across the supply strip and remove the roll of
supplies.
3. Push the power switch on.
If you don’t see FORMAT? prompt, press until
you see the prompt.
4. Press . The display shows:
RELOADING
5. Press the trigger to feed the backing paper out through the
rear of the printer.
6. Press to exit. You’ll see
SUPPLY? TYPE B
Enter 1 for TYPE? A or enter 2 for TYPE? B
1
. Press .
You’ll see the FORMAT? prompt.
1
The supply type you enter can be found on the supply carton.
Backing
Paper
Power
Switch
Figure 6
Operator’s Handbook
12