Filter
Top Products
GTX
PAGE 15
CENTURY SERIES
GTx Group Modules
The Group Module is where input signals are combined and
configured for grouped output; effects & aux assignment/rout-
ing are also accomplished here. Fully loaded GTx consoles
have eight group modules. Group number is indicated on PFL
switch.
Group Meter
Located on the meter bridge, it indicates the post-fader output
level of the group.
Matrix Levels (A, B)
Adjusts the level of group signal sent to the respective matrix.
Effect Return Gain
Controls gain on the signal returning from the attached effect.
Effect Return EQ Controls
Alter the effect return signal pre-fader by providing 16 dB of
boost and cut. Upper control is centered at 80Hz, while the
lower control is centered at 10 kHz.
Effect Aux Sends 1/2 (5/6)
A dual-concentric pot is used to control the level of effect
return signal sent to Aux Sends 1(center knob) and 2(outer
knob).
Aux 5•6 Switch
Switches function of Effect Aux Sends control between Auxes
1&2 and Auxes 5&6.
Pre/Post Switch
Switches effect return signal between pre & post Effect Level
Control.
Effect Aux Sends 3&4 (7/8)
A dual concentric pot is used to control the level of effect
return signal sent to Aux Sends 3(center knob) and 4(outer
knob).
Aux 7•8 Switch
Switches function of Effect Aux Sends control between Auxes
3&4 and Auxes 7&8.
Effects Assignment L-C-R Switch
Configures Left/Right and Center/Mono assignments for Left -
Center - Right Panning. L-R and Mono assign switches must
be down
Effects Assignment Pan Switch /
Group Assign Switches (1-8)
With PAN switch down, PAN control varies the level of the
group assignments with odd numbered groups on the left and
even numbered groups on the right. With PAN switch up,
groups can be individually selected and are unaffected by PAN
control. Group Assign switches assign signals to Group buses.
Effects (EFX) Return Pan
Positions the EFX Return signal between left & right, between
left-center-right, or between odd & even-numbered assigned
groups.
Effects (EFX) Return Level
Adjusts the final effect return signal level.
Effects (EFX) Mute
Mutes the effect return signal.
Effects (EFX) PFL
Allows for Pre-fader listening of the effect return signal.
Effects (EFX) Peak & Signal LED’s
The red LED indicates that the effect signal is within 3dB of
the clipping point. The green LED constantly displays the level
of signal activity by varying in intensity.
Group Pan
Positions group image between Left & Right output assign-
ments.
Group Mute
Mutes the group signal except for the group insert send.
Group Mono Assign
Assigns the associated Group signal to the Mono bus.
Group L-R Assign
Assigns the associated Group signal to the Left and Right
buses. Exact assignment will be dependent upon the position of
the Group Pan control.
Group LCR Switch
Configures Left/Right and Center/Mono assignments for L-C-
R Panning. For L-C-R panning, Group L-R and Group Mono
assign switches must be down.
Matrix Pre/Post
Switches the Matrix send between pre and post-fader settings.
Fader Reverse w/LED
Swaps functions between the Effect Level control and the
group fader; one becomes the other.
Group PFL
Allows for Pre-fader Listening of the Group signal.
Group Peak & Signal LED’s
The red LED indicates that the group signal is within 3dB of
the clipping point. The green LED constantly displays the level
of group signal activity by varying in intensity.
Group Fader
Controls all post-fader group signal outputs.
EFX Return Scene Mute
Assignments
Assign the EFX return signal to any of the four scene mute
groups. Scene Mute combines with the effect’s local Mute but-
ton, and actuates the local Mute LED.
EFX Return Scene Mute Safe Switch
Disables all selected EFX Scene Mute assignments. An associ-
ated green LED indicates the return is in a Safe state.