Filter
Top Products
GTX
PAGE 5
CENTURY SERIES
Master Module Connections
Matrix Out (A&B)
These two XLR connectors deliver a balanced signal from the
associated matrix sends.
Mono Out
This XLR connector delivers a balanced post-fader signal con-
taining all signals assigned to the Mono clean bus.
Right Out
This XLR connector delivers a balanced post-fader signal con-
taining all signals assigned to the right output.
Left Out
This XLR connector delivers a balanced post-fader signal con-
taining all signals assigned to the left output.
Matrix Insert (A&B)
This ‘combined send & return’ TRS jack allows for the inser-
tion of an effect or signal processor into the audio path of the
associated matrix.
Mono Insert
This ‘combined send & return’ TRS jack allows for the inser-
tion of a signal processor into the path of the mono sub-mix.
Right Insert
This ‘combined send & return’ TRS jack allows for the inser-
tion of an effect or signal processor into the audio path of the
right sub-mix.
Left Insert
This ‘combined send & return’ TRS jack allows for the inser-
tion of an effect or signal processor into the audio path of the
left sub-mix.
Monitor Out (R&L)
These two XLR connectors provide a balanced signal for the
left and right local monitor.
Aux 1-8 Out
These eight XLR connections provide the balanced output sig-
nals from their respective auxiliary buses.
Ext. Talkback Out
This XLR connector provides an external balanced signal from
the selected talkback source.
Ext. Talkback In
This XLR connector accepts a balanced signal which is assign-
able to any of the locations in the talkback system.
Stereo Program In
This 1/4-inch jack accepts an unbalanced stereo line level sig-
nal. Polarity is as follows: Tip=Left, Ring=R,
Sleeve=Common.
Oscillator / Pink Noise In
This 1/4-inch TRS connector accepts a balanced or unbalanced
signal from an oscillator or pink noise generator. This signal is
assignable via the talkback assignment switches. Plugging into
this jack disables the internal 1kHz oscillator.
Matrix Module Connections
Matrix Out
This XLR connector delivers a balanced signal
from the matrix module.
Matrix Insert
This ‘combined send & return’ TRS jack allows
for the insertion of an effect or signal processor
into the audio path of the matrix output.
Aux In 1
This XLR connector accepts a balanced signal at
+4dB level, which can be summed with all the
other signals in the matrix output.
Aux In 2
This XLR connector accepts a balanced signal at
+4dB level, which can be summed with all the
other signals in the matrix output.
MTX INSERT
AUX IN 2
MATRIX OUT
AUX IN 1
1
2
3
1
2
3
Matrix
Module