Filter
Top Products
GTX
PAGE 19
CENTURY SERIES
GTx Master Section
The master section is the control center for the GTx console.
Monitoring, talkback, PFL, Stereo Program In, Master Aux &
Matrix, L-C-R, internal oscillator and Scene Muting functions
are all controlled here.
Lamp Dim Control
Controls the intensity of the lighting devices plugged into the
XLR sockets on the back of the meter bridge.
Talkback Mic Input
Allows for a microphone to be plugged in for use with the talk-
back system. An additional Talkback Mic Input jack can be
found next to the headphone jack on the front-right of the con-
sole under the arm rest.
Power Indicators
These four LED’s indicate the status of the four voltages used
by Century Series consoles.
Headphone Jack
Delivers right and left output, unless a PFL switch is
depressed. Whenever any signal is in PFL mode, the head-
phone jack will deliver that signal. An additional headphone
jack is located beneath the hand rest on the right-front part of
the console.
Headphone Level Control
Controls the signal level delivered to the headphone jacks.
L, R & Mono Matrix Sends
Controls level of Right, Left and Mono signals sent to the two
matrices.
Local Monitor Level Control
Controls level of signal delivered to the monitor outputs.
Auxiliary Mutes
Mutes the respective auxiliary sends.
PFL Defeat
Disables PFL function to the local monitor, allowing local
monitor output to function as an additional left/right output.
Dim Switch
This switch introduces a -12 dB attenuation into the local mon-
itor and headphone outputs. It is disabled when PFL defeat is
depressed, auto-active when TB is on.
Mono Switch
Switches the local monitor output from standard stereo mode
to a mono mode.
Stereo Program In Gain
Adjusts the gain of the Stereo Program In signal.
Stereo Program In EQ
Two-band fixed frequency (10kHz and 80Hz) EQ that affects
the Stereo Program In signal.
Stereo Program In Assignments
Assigns the Stereo Program to the associated buses.
Local Monitor Mute
Mutes the local monitor signal output.
Aux Master Controls
Controls final output signal level of the auxiliary outputs.
Aux AFL Switches
Switch the eight auxiliary outputs to After Fader Listening
mode, via normal PFL signal path. Aux outputs can be moni-
tored as stereo pairs if both AFL switches are depressed. If
only one is depressed, that AUX is monitored in mono.
External Oscillator Switch
Turns on the internal oscillator or accepts signal from the1/4"
TRS Oscillator input jack.
External Talkback Input Switch
Selects the external talkback input XLR as an input signal to
the talkback section and overrides the Oscillator.
Stereo Program Balance
Adjusts balance of stereo signal from Stereo Program input.
Stereo Program Level
Controls final output signal level of the Stereo Program.
Talkback Level Control
Controls the level of the selected talkback source.
External Talkback Output Switch
Turns on the external talkback XLR.
Stereo Program Mute
Mutes the output of the stereo program.
Stereo Program PFL
Allows Pre-fader Listening of the Stereo Program signal.
Talkback Assignment Switches
Assigns talkback signal to outputs, groups and/or auxes.
Blend Level
Controls level of L & R signal blended to assigned auxes.
Blend Assignment Switches
Assigns the Left and Right signals to the respective auxes thru
blend-level pot.
Talkback On/Off Switch
Turns the talkback system on and off.
Matrix Master Levels (A&B)
Controls the final output level of the respective matrix.
Matrix Master Mutes (A&B)
Mutes the respective matrix signal.
Matrix Master AFL (A&B)
Allows After-Fader Listening of the respective matrix signal.
Matrices A&B can be monitored as a stereo pair if both AFL's
are pressed; if one button is pressed, only one of them is moni-
tored.
Scene Mute Master Switches
Turn on and off the four Scene Mutes.
Aux Scene Mute On/Off Switch
Turns the Aux Scene Mute system on and off.
L/R/Mono Mute Switches
Mute outputs of Left, Right and Mono signals respectively.