Filter
Top Products
20 C1528M-F (6/05)
Table B. Communication Port Devices and Wiring (Continued)
Port Input Type Wiring Pin-Outs Default Device Programmable to Other Device(s)
7 RJ-45 RS-485 or RS-232 RS-485 Pin-Outs: ASCII device CM9760-MDA, Satellite,
1 Rx+ keyboards (KBD100/200A/300A)
2 Rx-
5 Ground
7 Tx-
8 Tx+
RS-232 Pin-Outs:
1Rx
5 Ground
8Tx
8 RJ-45 RS-485 or RS-232 RS-485 Pin-Outs: ASCII device CM9760-MDA, keyboards
1 Rx+ (KBD100/200A/300A)
2 Rx-
5 Ground
7 Tx-
8 Tx+
RS-232 Pin-Outs:
1Rx
5 Ground
8Tx
Table C. Default Port Settings
Port Default Settings
1 MGR, RS-232, 56000 baud, no parity, 8 data bits, 1 stop bit
2BAY-TO-BAY, RS-232, 115000 baud, no parity, 8 data bits, 1 stop bit
3 M, RS-485, 19200 baud, no parity, 8 data bits, 1 stop bit
4 MUX-GENEX, RS-485, 9600 baud, odd parity, 8 data bits, 1 stop bit
5, 6 KBD300, RS-485, 9600 baud, odd parity, 8 data bits, 1 stop bit
7, 8 ASCII, RS-485, 9600 baud, no parity, 8 data bits, 1 stop bit
NOTE: Refer to the
Programming
section for instructions on changing Port settings.