Filter
Top Products
C1528M-F (6/05) 83
CONFIGURE CM9700-MGR SYSTEM MANAGER SETTINGS
Instructions for configuring the CM6800-E-48X8 as a satellite device with the CM9700-MGR System Manager software are
provided here. If you are using the CM9760-MGR System Manager software, refer to the
Configure CM9760-MGR System
Manager Settings
section.
To add a satellite device to a 9700 system, you simply need to add the satellite device in the CM9700-MGR. The Add Device
wizard helps you configure all the settings that are needed to set up the device for satellite operation. Detailed instructions for
adding a satellite device in the CM9700-MGR are provided in the CM9700-MGR Software Guide.
Note that you cannot program camera titles for satellite cameras through the 9700 System Manager. You can program these
camera titles directly from the satellite device. When a 9700 System monitor displays a satellite camera, the title received from
the satellite device is displayed.
Figure 58. Add a Satellite Device in the CM9700-MGR
Once the CM9700-MGR system configuration file programming is complete, you must transfer the configuration files (the “flat
files”) to the CM9700-CC1. Refer to the CM9700-MGR Software Guide for instructions.