Filter
Top Products
66 C1528M-F (6/05)
CONTROL RECEIVERS
Select a suitable camera and operate a PTZ function. A keyboard with “view-only” access can view the signal from the specified camera
but cannot control the camera.
Extended Coaxitron protocol receivers can be operated without any programming changes. Other receiver control protocols require
programming changes. Refer to the Programming section.
Receiver control is not available with the KBD100 keyboard.
KBD200A KEYBOARD
Pan/Tilt/Zoom
Press and hold the appropriate pan/tilt key until the camera
reaches the desired position. To change the speed of movement,
press a number (1-9) key first (1=slowest, 9=fastest). Press and
hold the appropriate zoom key until the desired effect is seen.
Lens Control: Focus, Iris
Press and hold the appropriate lens control key until the desired
effect is seen.
KBD300A KEYBOARD
Pan/Tilt/Zoom
Move the joystick until the camera reaches the desired position.
To increase the speed of movement, move the joystick farther
from center.
Twist the joystick clockwise to zoom in, counterclockwise to zoom
out.
Lens Control: Focus, Iris
Press and hold the appropriate lens control key until the desired
effect is seen.
KBD960/KBR960 KEYBOARDS
Pan/Tilt/Zoom
Move the joystick until the camera reaches the desired position.
To increase the speed of movement, move the joystick farther
from center or press the T key to pan at turbo speed.
Twist the joystick clockwise to zoom in, counterclockwise to zoom
out. Or use the IN/OUT key to zoom in or out.
Lens Control: Focus, Iris
Use the NEAR/FAR key to focus near or far.
Use the OPEN/CLS key to open or close the iris.