Filter
Top Products
Chapter 7: Configuring the Protocols
Perle 833IS User Guide 109
Destination Type
Specifies whether the destination type is Network or Host. If destination type is
Network, the entry will define a route to a single network.
If destination type is host, the entry will define a route to a single host.
Destination Port
Specifies whether the destination is reached via the 833IS’s LAN port or via a WAN
port through a LAN-to-LAN connection. If the destination is to be reached via the
LAN port, click on LAN and enter the IP address of the router that will be used to
reach the destination. To specify a WAN port, click on WAN and then select the
desired LAN-to-LAN connection from the drop-down menu.
IP Filter
The IP Protocol - IP Filter screen has the following settings:
The Packet Filtering feature allows the Perle 833IS Server to accept or reject
incoming data packets that match an entry on a list of defined filters. The filters are
based on protocol and packet addresses.
After the filters have been defined, up to 10 IP and/or 10 IPX filters can be assigned
to the Perle 833IS or to each user or to both.