Filter
Top Products
Setting up the 833IS LAN Connection
36 Perle 833IS User Guide
Press
If you wish to save your configuration to NVRAM then press Enter.
Press Enter again to confirm the saving of this configuration.
This configuration takes affect immediately and does not require an IPL of the
833IS.
Note: if the 833IS is powered off before the 833IS Firmware is downloaded this
manager setup configuration will have to be repeated.
If you are using an IP address server, determine the MAC address of the 833IS by
doing the following:
Press the key until you see this front panel:
Press
Press
Provide this address to your IP Network Administrator.
Configuration for the Manager is now complete.
Save Config
Save Config
Confirm
Manager Setup
Status
MAC Address
020000044444