Perle Systems 833IS Network Card User Manual


 
FCC/DOC Radio Frequency Interference Statement
Note
This equipment has been tested and found to comply with the limits for a Class A Digital
Device, pursuant to Part 15 of the FCC rules and to DOC Radio Interference Regulations,
C.R.C., c1374. These limits are designed to provide reasonable protection against harmful
interference when the equipment is used in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
FCC/DOC compliance requires that all I/O cables used with Perle products be constructed
using shielded cable, metal-shelled connectors and conductive back-shells.
This equipment is approved in accordance with DIN IEC 380/VDE 0806/08.81. If this unit is
installed as an office machine, the installation must conform with the above standard.
Equipment must be used with an appropriately approved power supply cordset.
Caution
Changes or modifications to a Perle product not expressly approved by Perle Systems
Limited may void the users authority to operate the equipment.