Filter
Top Products
Cable Planning and Requirements
16 Perle 833IS User Guide
100Base-TX:
■
Uses Category 5 unshielded twisted pair (UTP) or Type 1 shielded twisted pair
(STP) cable.
■
Terminated with RJ-45 plugs.
■
Cables are straight wired – pin 1 of one end of the cable is wired to pin 1 on the
other end.
■
If you are using STP cable, make sure that all cables and connection points are
shielded.
■
Cables are attached to a 100Base-TX hub in a star configuration.
■
Maximum length from 833IS to hub is 100m (328 ft.).
There are other cabling types that are available for Ethernet:
■
10Base5 (AUI).
■
100Base-T4.
■
100Base-FX.
■
If you are using any of these types of cabling, you will require an adapter. See
your network equipment supplier to obtain this adapter.
▲
100BaseTX Network
100Base-TX Hub Category 5 UTP
Type 1 STP