Open as PDF
26 DPM 9350/00 - User Manual
Changing the contrast
You can change the contrast setting for the DPM display.
This is the menu entry for the contrast setting:
Confirm the menu entry selection by pressing the Jog Dial.
The DPM provides seven contrast levels, from low contrast
. The default setting is level 5: .
Confirm your preferred contrast setting by pressing the Jog Dial; this also
returns you to the DPM main menu.
Displaying the remaining time
The DPM enables you to have an additional time displayed for the recording
time which is left on the memory card. The remaining recording time depends
on the setting for the recording mode (SP/LP).
Note: The remaining time is only displayed if you have set the
Advanced display option for the DPM appearance in the DPM
This is the menu entry for the remaining time; a check mark next to the symbol
indicates that the remaining time is available on the DPM display. The symbol
always shows the current setting:
Confirm the menu entry selection by pressing the Jog Dial and proceed as