Filter
Top Products
12 Philips · PPF 725 · PPF 755
EN
Telephone Functions
Help 3 · Telephone Functions
Connecting Additional Telephones
For information on how to connect additional tele-
phones and which functions are available to you, please
refer the chapter on Telephone Lines and Additional
Devices, (see also chapter Telephone Lines and Additional
Devices, page 31).
Placing a Call on the Device
· Placing a Call on the Device
Dial the desired number. There are several ways to do
this: Then pick up the handset.
Direct Dialling
Manual Dialling: Dial the desired number using the
numeric keypad.
Telephone Book
Telephone Book:
1. Press m.
2. Select an entry using [. Enter the starting letters
with the numeric keypad to quickly navigate through
the telephone book.
Quick search/entering initial letters with the let-
ter keypad: Enter the initial letters with the letter key-
pad to quickly navigate through the telephone book.
Short Dial: Press Ý. Select the desired entry using
[ or with the numeric keys.
Recalling Short Dial Number
Redial List
Redial List: Press @. Use [ to select an entry from
the list of the dialled numbers.
Outgoing Calls
Caller List: Press and hold @ (at least two seconds).
Use the [ to select an entry from the list of callers.
Calls Received
CLIP Prerequisite
Calling Additional
Telephone Functions
· Calling Additional Telephone Functions
Type 2 (großer Core)
(PPF¦755)
Function is not supported in all countrie s and networks
(Function is not supported in all countries and
networks)
Additional Telephone Functions
You can use additional telephone functions with your
device for example call toggling, three-way call or call
forwarding. Contact your telephone company to inquire
whether or not these functions are available for your
connection. The signal to the switchboard to call these
services is a short line interruption (Hook Flash). How
to call up the functions, depends on your telephone
company and may vary from the description found be-
low.
Making a Second Call
1. During a call, press R.
2. Enter the desired number using the numeric keypad
or select a saved entry.
Switching Between Calls (= Call
Toggling)
Switching Between Calls
Press R, to toggle between the calls.
Receiving a Second Call
Call Waiting
During a call, you can be informed about another call by
a notification tone (= call waiting) if your telephone
company offers this service. The notification tone for
call waiting on the device is switched off in the factory.
Receiving a Second Call
During a call, press R to accept the new call.
CLIP Prerequisite
4 Telephone Functions
Printing Telephone Book Functions
Press î and 3 to print an overview of the
telephone book functions.
Direct Dialling
You can also lift up the receiver first, then dial a
number. The dialling process begins immediate-
ly.
Access Function
You can also search for an entry in the tele-
phone book by pressing OK, 11 and
OK.
Multiple Categories for One Entry
You can save an entry multiple times with
the same name but in a different category. In
the telephone book, the first letter of the
category appears after the entry.
Access Function
You can also load short dial entries by holding
the respective number key pressed (for at least
two seconds).
Access Function
You can also load the redial list by pressing OK,
22 and OK.
Access Function
You can also load the caller list by pressing OK,
21 and OK.
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden-
tification (CLIP) must be activated for your tel-
ephone line (country and network dependent).
The number and name will not be shown if the
caller suppresses his number.
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden-
tification (CLIP) must be activated for your tel-
ephone line (country and network dependent).
The number and name will not be shown if the
caller suppresses his number.