Filter
Top Products
28 Philips · PPF 725 · PPF 755
EN
Settings
Cursor Navigation 1
Entering the Date and Time
· Entering the Date and Time
1. Press OK, 91 and OK.
2. Enter the time, e.g. 1400 for 2 pm.
3. Enter the date (two digits each) e.g.
080627 for 08.06.27.
4. Confirm with OK.
Time and Date After a Short Power Failure
Selecting the Language
· Selecting the Language
1. Press OK, 92 and OK.
2. Use [ to select the desired display language.
3. Confirm with OK.
Selecting the Country
· Selecting the Country
Setting the Country Correctly
Reset When Setting the Country
1. Press OK, 93 and OK.
2. Use [ to select the country in which you are op-
erating the device.
3. Confirm with OK.
4. Select with [SURE: YES.
5. Confirm with OK.
Entering Number
· Entering Number
Page Header
Your name and number are added together with date,
time and page number at the top edge of each fax trans-
mission (= header).
1. Press OK, 94 and OK.
2. Enter your number. Using # or * you can enter
a plus sign.
3. Confirm with OK.
Entering Name
· Entering Name
1. Press OK, 95 and OK.
2. Enter the name using the letter keypad. Enter capital
letters by pressing and holding + key. You can delete
individual characters using \. You can enter space
using ½. Press CTRL and the respective letter key
to enter the special character printed above it.
3. Confirm with OK.
Adjust contrast
· Adjust contrast
Adjust contrast
For copying and printing of fax messages, you can select
different contrast levels.
1. Press OK, 44 and OK.
2. Using [, select the desired contrast:
CONTR.:LIGHT- For brighter copies and fax
transmission
CONTR.:NEUTRAL—For all types of originals (for
example white text on black background or docu-
ments with coloured background)
CONTR.:OPTIMISED (Factory settings)—Opti-
mized adaptation for text and photo printing
CONTR.:DARK- For darker copies and fax trans-
mission (for example documents with faint printing)
3. Confirm with OK.
Modifying the Basic Settings
10 Settings
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters. Press j to close
the menu and return to the starting mode.
Time and Date After a Short Power
Failure
You must check the time and date after a short
power failure. Confirm with OK.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are op-
erating the device. Otherwise your device is
not adapted to the telephone network. If your
country is not included in the list, you must
select a different setting and use the correct
telephone cable for the country. Consult your
retailer.
CAUTION!
Settings will be Deleted!
When you select a new country, all settings
are reset to the factory defaults for that coun-
try. Saved data remains intact. Check the
number entered for the header.
Navigating in the Editor
You can move the cursor using [. Use C
to delete individual characters.
Modifying the Basic Settings
The changed settings are stored as new default
settings. If you select a special function for a
one-time process, take care to restore the de-
fault settings or factory settings after that.