Filter
Top Products
Service · Fixing a Document Jam 35
EN
4. Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
5. Close the device. Insert the paper tray in the open-
ing provided for it behind the paper feeder. Insert
paper again.
Fixing a Document Jam
· Fixing a Document Jam
1. Remove the paper from the paper feeder and take
the paper tray out of the device.
2. Open the device by lifting the panel using grip in the
centre and folding it up.
3. Open the scanner cover and the cover of the auto-
matic document feeder by first pushing the support
(A) and then the support (B) inside. The cover (C)
falls freely.
4. Carefully pull the document to the front or to the
back out of the device.
5. Close the scanner cover and the cover of the auto-
matic document feeder. Both the supports must se-
curely snap into place.
6. Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
7. Close the device. Insert the paper tray in the open-
ing provided for it behind the paper feeder. Insert
paper again.
DANGER!
Device can Close with a Snap!
Lock the cover of the device completely
into place when opening the device. You
could be injured if the cover falls while you
are working on the device.