Filter
Top Products
34 Philips · PPF 725 · PPF 755
EN
6. Carefully remove the rubber bands from the new
ink film. Make sure that the film is not damaged!
7. Place the larger roll with the ink film in the rear ink
film tray. The blue gear wheel must be on the right
hand side.
8. Place the smaller roll without ink film in the front
tray. The blue gear wheel must be on the right hand
side and the pin must be inserted in the depression
on the left hand side.
9. Break the chip card from the Plug’n’Print card. In-
sert the chip card in the plug socket on the left hand
side next to the ink film tray.
10. Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
11. Close the device. Insert the paper tray in the open-
ing provided for it behind the paper feeder. Insert
paper again.
Fixing a Paper Jam
· Fixing a Paper Jam
1. Remove the paper from the paper feeder and take
the paper tray out of the device.
2. Open the device by lifting the panel using grip in the
centre and folding it up.
3. Carefully pull out the paper.
DANGER!
Device can Close with a Snap!
Lock the cover of the device completely
into place when opening the device. You
could be injured if the cover falls while you
are working on the device.