Filter
Top Products
16 Philips · PPF 725 · PPF 755
EN
Answering Machine
(model dependent)
(model dependent)
Help 3 · A nswering Machine
Switching On and Off
· Switching On and Off
Switching On/Off on the DeviceAnonymous Outgoing Message
Press b three times to turn the answering machine on
or off. If the answering machine is turned on, the symbol
— appears on the display.
Activation
Editing the Outgoing
Message
· Editing the Outgoing Message
Recording the Outgoing Message
Recording the Outgoing Message
1. Press b.
2. Select with [OUTGOING MSG..
3. Confirm with OK.
4. Select with [MESSAGE: RECORD.
5. Confirm with OK.
6. Press OK to record an outgoing message. Wait for
the confirmation tone before you say your text.
7. Press OK to end the recording. The recording is
played back.
Recording the Outgoing Message
Playing Back the Outgoing
Message
1. Press b.
2. Select with [OUTGOING MSG..
3. Confirm with OK.
4. Select with [MESSAGE: PLAY.
5. Confirm with OK. The outgoing message is played
back.
Using Anonymous Outgoing
Messages
Anonymous Outgoing Message
You can replace your personal outgoing message with
the factory default anonymous message.
1. Press b.
2. Select with [OUTGOING MSG..
3. Confirm with OK.
4. Select with [MESSAGE: DEFAULT.
5. Confirm with OK. The outgoing message is played
back.
Using Announcement without
Recording Message
Outgoing Message Without Recording of Messages
You can record an outgoing message which the caller
hears for which no message can be recorded in reply (=
external memo).
1. Press b.
2. Use [ to select EXTERN. MEMO.
3. Confirm with OK.
4. Use [ to select whether you would like the out-
going message to be switched on/off without re-
cording the message.
5. Confirm with OK.
5 Answering Machine
Printing Answering Machine Functions
Press î and 3 to print an overview of the an-
swering machine functions.
Using Anonymous Outgoing Messages
If you do not record a personal announcement,
the answering machine uses the anonymous an-
nouncement set by the factory.
Access Function
You can also call the function by pressing OK,
71 and OK.
Recording the Outgoing Message
During playback, press C and OK in order to
delete the currently playing outgoing message.
Using [, set the volume. Stop the playback
with j.
Access Function
You can also call the function by pressing
OK, 75 and OK.
Length of Outgoing Message
The outgoing message must be longer than
ten seconds and shorter than twenty sec-
onds.
Recording the Outgoing Message
If the volume of the outgoing message is too
low, rerecord the same. For recording, lift up
the telephone handset of the device and speak
the text into the microphone.
Access Function
You can also call the function by pressing
OK, 75 and OK.
Access Function
You can also call the function by pressing
OK, 75 and OK.
Access Function
You can also call the function by pressing
OK, 76 and OK.
Overwriting Existing Outgoing
Message
When you record an outgoing message, you
are asked, if you would like to use the old
outgoing message or would like to record a
new one. Confirm with OK.