Filter
Top Products
Chapter 3
IBM DOS / WINDOWS Driver Installation
Owner’s Manual / Software Driver Installation Guide
3-1
DOS /WINDOWS device driver installation
Inspection Checklist / PC
Pioneer Changers are packaged with a floppy disk containing software device
drivers and the MSCDEX file for IBM-PC and compatible computers. The disk
also contains an Installation program, Installation Help file, a file to load and
remove the MPC control utility and XDISC, a program that allows assignment of
one drive letter to each daisy-chained drive. Before you proceed with the
installation, verify that you have the necessary files on the diskette:
Step 1: Exit your current computer application and go to the DOS prompt.
Step 2: Insert the diskette into the “A” or “B” drive, depending on your
system configuration;
Step 3: Type: DIR A: or DIR B: indicating the drive where the
diskette has been inserted and press [ENTER]. C:>DIR A:
The following file names should be listed on the screen:
1. INSTALL.EXE
2. MSCDEX.EXE
3. DRD600.SYS
4. DRD60PS.SYS
5. DRD60ASP.SYS
6. INSTALL.CWA
7. INSTALL.HLP
8. MPC.COM
9. MPCRMV.COM
10. README.DOC
11. XDISC.EXE
If your disk does not contain all of the files listed above, please contact your
Authorized Pioneer Dealer or call the Pioneer Bulletin Board System using your
computer, modem and computer software to obtain current drivers. (See
Appendix F, Pioneer Technical Resource Numbers for Pioneer BBS number.)
After you’ve verified the contents of the disk, proceed to the next page for QUICK
INSTALLATION instructions.