Filter
Top Products
IBM DOS / WINDOWS Driver Installation Chapter 3
Owner’s Manual / Software Driver Installation Guide 3-5
accept the default
selection or Press
[F3] to bring up the adjacent menu that allows you to select a different host
adapter. Use the UP or DOWN arrow keys, or a mouse to indicate the kind of
SCSI host adapter you are using. See Figure 6.
If you are using a Future Domain SCSI Host Adapter, accept the default setting:
Future Domain is highlighted. Press [ENTER].
Keyboard
Use the Up and Down arrow keys
to highlight your selection then
press [ENTER] to confirm.
Mouse
Click on the selection with the
mouse. Double Click to accept, or
press [ENTER].
Indicate the SCSI Host Adapter you have installed
Note: If you are using an ASPI Compatible host adapter, make sure you first
load the ASPI Manager provided by the card manufacturer. This software must
be loaded BEFORE the Pioneer drivers.
If you are not using a Future Domain SCSI Host Adapter, press the [F3] key to bring
up the adjacent menu and then, select the name of the host adapter (interface card)
you are using, ASPI , DD-C5002, Future Domain, or IBM. NOTE: ASPI refers
to ASPI compatible cards, such as Adaptec, etc.
Figure 8 - DOS/WINDOWS Installer: To Begin Installation
Figure 7 - Select Correct SCSI Host Adapter / Overview
✓
P
ioneer CD-ROM Installer Ver 2.0