Filter
Top Products
Chapter 4 MACINTOSH Driver Installation
4-6 Software Driver Installation Guide / Owner’s Manual
Using CLD Access
CLD Access is a control panel document. Select Control Panels from under the
Apple Menu, then double click on CLD Access or go into the System Folder and
open Control Panels Folder, then double click on CLD Access to launch it. You
will see the ROM Mount Controller dialog box:
This controller indicates the SCSI ID number of the Pioneer CD-ROM Changer.
And it also shows the discs loaded into the Pioneer Changer. If there is an X in
the box next to the title and the title is in black lettering, you know the disc is
mounted. NOTE: To the left of the title, you will see a musical note, if as in the
example above, the CD-ROM contains CD-Digital Audio.
Multi-Mount Option
Unless Multi-Mount is selected, the drive will unmount the disc currently mounted
and mount the next disc selected. Click on the Multi-Mount box if you wish to have
more than one disc mounted on the desktop at one time.
CLD Menu Option
If the CLD Menu box is selected, you will see the CLD Menu icon below appear
at the far right hand side of the Macintosh’s top menu bar. Select CLD Menu by
checking the box in the lower left hand corner of CD-ROM Controller dialog box
and restart computer. On boot up, you will see the icon on the menu bar. Clicking
on this icon will allow you to select mounted discs from the desktop, without
having to bring up CLD Access.
Figure 22 - CLD Access / ROM Mount Controller
CLD Access