Filter
Top Products
9 • Maintaining and Updating
9 - 2 SV62146 Rev. D
Items to Keep
On Hand
The following is a list of items you should keep on hand:
• Ink Cartridge
• Tape Roll
• E-Z Seal® Sealing Solution
Refer to Chapter 11, Supplies and Options for details on how to order these
items.
Cleaning the
Exterior
To clean the outside of your mailing system, wipe it off with a soft dry cloth.
Do not use harsh chemical cleaners. If necessary, use only Windex® or
soapy water.
You may clean the display screen on the IntelliLink® Control Center with a
mild glass cleaner and soft cloth.
Cleaning the
Deck Sensors
Wipe the deck sensor windows
with a damp cloth on a regular
basis. Wipe the deck sensor
windows whenever a problem
(such as mail not feeding)
occurs that may be caused by
a dirty sensor.
Cleaning the Flap
Array Sensors
Run the flap array cleaning envelope through the machine once a week or
every 0,000 cycles in order to keep the flap array sensors clean.
1. 1. Enter the following settings on the machine:
• Postage $0.00
• Sealer Off
• W-O-W® Off
2. Place the flap array cleaning envelope on the feed deck with the flap
opened and inserted behind the feed deck.
3. Press Start.
Repeat steps and 3 four more times.
CAUTION: Do not pour or spray cleaner directly on the dis-
play screen or machine. Spray on the cloth and wipe the
screen with the dampened cloth.
Sensor