Filter
Top Products
DM1100™ Digital Mailing System Operating Guide
SV62146 Rev. D 9 - 11
Changing the
Wiper Blade
Assembly
When you change the printhead, you must also replace the wiper blade
assembly.
Instructions for replacing the wiper blade assembly are included with each
replacement and are repeated here for your convenience.
1. From the IntelliLink® Control Center, press the Menu key.
2. Select Maintenance.
3. Select Replace Wiper Blade Assembly.
The “Preparing Wiper Blade” screen appears. During this time, the sys-
tem moves the printhead assembly back so that you can access the
wiper blade assembly.
4. Lift the main cover and
locate the wiper blade
assembly.
5. Locate the small black
lever behind and next to
the wiper assembly.
6. Push the lever to the
rear of the machine to
release the wiper.
Wiper blade assembly