Filter
Top Products
IP DSLAM
159
5.5.4.3 Delete atm port
Description:
Use this command to delete.
Command Syntax:
delete atm port ifname <interface-name>
5.5.4.4 Modify atm port
Description:
Use this command to modify.
Command Syntax:
modify atm port ifname <interface-name>[ maxvc <maxvc-val> ] [ maxvpibits
<maxvpibits-val> ] [ maxvcibits <maxvcibits-val> ] [ oamsrc <oamsrc-val> ] [ orl
<orl-val> ] [ trfclassprofileid <trfclassprofileid-val> ] [ profilename
<profilename-val> ] [ atmtransporttype cell | packet ] [ enable | disable ]
Parameters:
Name Description
ifname
<interface-name>
Physical interface index
Type: Create － Mandatory
Delete － Mandatory
Modify － Mandatory
Get － Optional
lowif <lowif-val>
This is the IfIndex of the low interface on which this ATM port is
configured. Lower interface can be of type dsl-* or dsli-* or dslf-* or
abond-*
Type: Create － Mandatory
maxvc <maxvc-val>
This specifies the maximum number of VCCs (PVCCs), supported at
this ATM interface. This field is not valid if the atmtransporttype has the
value packet
Type: Create － Optional
Modify － Optional
Valid values: 1 -8
Default value: 8
maxvpibits
<maxvpibits-val>
The maximum number of active VPI bits configured for use at the ATM
interface.
Type: Create － Optional