Filter
Top Products
IP DSLAM
381
field in the packet in the range 0 to 255. Other values are invalid
for this action. The application of this value is dependent on the
mask parameter. For setbaclevel action this parameter should
contain valid Buffer Admission Control level value of 0 or 1. For
pktvlanid, retagvlanid, pktservicevlanid and retagservicevlanid
actions this parameter should be filled with VLAN ID value in
the range 1 to 4094. For mirror action this parameter should
be filled with valid mirror context id.
Type: Create － Optional
Modify － Optional
Valid values: 0 - 0xffffffff
Default value: 0
actionmask
<actionmask -val>
This field is valid for modifytos action only. Only lower 8-bits are
taken into consideration for modifytos action and other bits are
ignored. In the mask if a bit location contains 1, then the
corresponding bit in the TOS field is overwritten with the
corresponding bit in action value. In the mask if a bit location
contains 0, then the corresponding bit in the TOS field remains
unchanged.
Type: Create － Optional
Modify － Optional
Valid values: 0 - 0xffffffff
Default value: 0xffffffff
Example:
$ create filter rule actionmap ruleid 1 orderindex 1 action SetPrio priority 3
actionval 0x00000000 actionmask 0xffffffff
Output:
Verbose Mode On
Entry Created
Rule Id : 1 Order Index : 1
Action : SetPrio Priority : 3
ActionValue : 0x00000000
Action Mask : 0xffffffff
Verbose Mode Off:
Entry Created