Filter
Top Products
IDL series User Guide
422
which corresponding IP is being transported. If value of this
field is 'ethernet', then IP is being carried in ethernet header
and if it is 'pppoe' then corresponding IP is being carried in
PPP header.This field is valid only when value of 'offsethdr' is
any one of ip, tcp, udp, icmp or igmp.Otherwise this field is
extra
NamedList Id
This specifies the list identifier value of the named list which
will be used to do the lookup .In case 'gencmp' is 'innamedlist'
or 'notinnamedlist', this field is manadatory else it is extra.
References:
z Generic filter commands
5.13.30 Filter subrule ICMP Commands
5.13.30.1 Get Filter subrule icmp
Description:
Use this command to get.
Command Syntax:
get filter subrule icmp [ruleid <ruleid-val>] [subruleid <subruleid-val>]
5.13.30.2 Create filter subrule icmp
Description:
Use this command to create.
Command Syntax:
create filter subrule icmp ruleid <ruleid-val>subruleid <subruleid-val>
[ icmptype<icmptype-val> ] [ icmpcode <icmpcode-val> ] [ icmptypecmp eq |
neq | any ] [ icmpcodecmp eq | neq | any ] [ subruleprio low | high | asinrule]
[ transporthdr ethernet | pppoe ]
5.13.30.3 Delete filter subrule icmp
Description:
Use this command to delete.
Command Syntax:
delete filter subrule icmp ruleid <ruleid-val> subruleid <subruleid-val>