Filter
Top Products
IDL series User Guide
428
subruleprio low | high |
asinrule
This specifies the priority of the subrule. Based on
this priority value, the subrule is created in fast or
slow memory. In case priority is specified as 'asinrule', subrule
priority will be same as specified in the rule.
Type: Create -- Optional
Modify -- Optional
Default value: asinrule
transporthdr ethernet |
pppoe
This specifies the type of the transport header in the packet in
which the corresponding IP is being transported. If the value of
this field is Ethernet(0x1), then the IP is being carried in the
ethernet header. If it is pppoe(0x2), then the corresponding IP is
being carried in the PPP header.
Type: Create -- Optional
Modify -- Optional
Default value: ethernet
Example:
$ create filter subrule igmp ruleid 1 subruleid 2 igmptype 0 igmpcode 0 groupaddr
from 224.0.2.3 groupaddrto 224.10.20.30 igmptypecmp eq igmpcodecmp eq
igmpgroupaddrcmp inrange subruleprio high
Output:
Verbose Mode On
Entry Created
Rule Id : 1 Subrule Id : 2
Igmp type : 0 IGMP type comparison : neq
Igmp code : 0 IGMP code comparison : neq
Start group address : 224.0.2.3 End group address :
224.10.20.30
IGMP group address comparison : inrange Subrule Priority : high
Transport Header : Ethernet
Verbose Mode Off:
Entry Created
Output field:
Field Description
Rule Id
Unique identifier of a filter rule of which this sub rule is being
created
Subrule Id
Unique identifier of a filter subrule
Igmp type
IGMP type