Planet Technology IDL-2401 Network Card User Manual


 
IP DSLAM
433
|inrange | exrange
Modify Optional
Default value: any
ipsrcaddrmask
<ipsrcaddrmask-val>
The mask value for source ip address. The mask is applied over
the source ip address before checking against a value.
Type: Create Optional
Modify Optional
Valid values: 1 - 0xffffffff
Default value: 0xffffffff
ipdstaddrmask
<ipdstaddrmask-val>
The mask value for destination ip address. The mask is applied
over the destination ip address before checking against a value.
Type: Create Optional
Modify Optional
Valid values: 1 - 0xffffffff
Default value: 0xffffffff
subruleprio low | high
|asinrule
This specifies the priority of the subrule. Based on this priority
value, the subrule is created in fast or slow memory. In case
priority is specified as asinrule, subrule priority will be same as
specified in the rule.
Type: Create Optional
Modify Optional
Default value: asinrule
transporthdr ethernet |
pppoe
This specifies the type of Transport header in the packet in which
IP is being transported. If value of this field is ethernet (1), then IP
is being carried in ethernet header and if it is pppoe (2) then then
IP is being carried in PPP header.
Type: Create Optional
Modify Optional
Default value: ethernet
tosfrom <tosfrom-val>
Start TOS value of the range of TOS values. This field is invalid if
'TosCmpType' is 'any'(7).This field and TosTo field specify a
range of TOS values, if 'TosCmpType' is either 'inrange'(8) or
'exrange'(9). Type: Create Optional
Modify Optional
Valid values: 0 - 0xff
Default value: 0
tosto <tosto-val>
End TOS value of the range of TOS values. This field is invalid if
'toscmp' is 'any'.This field and 'tosfrom' field specify a range of
TOS values, if 'toscmp' is either 'inrange' or 'exrange'.
Type: Create Optional
Modify Optional