Filter
Top Products
IDL series User Guide
588
OutTraps
The total number of SNMP Trap PDUs which have been generated by the
SNMP protocol entity.
AuthenTraps
Indicates whether the SNMP agent process is permitted to generate
authentication-failure traps. The value of this object overrides any configuration
infor-mation; as such, it provides a means whereby all au-thentication-failure
traps may be disabled.
SilentDrops
The total number of GetRequest-PDUs, GetNextRequest-PDUs,
GetBulkRequest-PDUs, SetRe-quest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity which were silently dropped be-cause the size of a
reply containing an alternate Re-sponse-PDU with an empty variable-bindings
field, was greater than, either a local constraint, or the maximum message size
associated with the origi-nator of the request.
ProxyDrops
The total number of GetRequest-PDUs, GetNex-tRequest-PDUs,
GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity, which were silently dropped, be-cause the
transmission of the (possibly translated) message to a proxy target failed in a
manner (other than a time-out) such that no Response-PDU could be returned.
References:
z SNMP commands.
5.23.4 SNMP Traphost Commands
5.23.4.1 Get snmp traphost
Description:
Use this command to get.
Command Syntax:
get snmp traphost [ip <ip-address>] [port <port-val >]
5.23.4.2 Create snmp traphost
Description:
Use this command to create.
Command Syntax:
create snmp traphost ip <ip-address > community <community-val > [port
<port-val >] [version v1 | v2c]