Filter
Top Products
IP DSLAM
551
Output:
Verbose Mode On
Entry Created
Profile Id : 1
Level : packet Type : trtcm
Rate : 24 Max Burst Size : 24
Peak Rate : 30 Peak Max Burst Size : 30
Verbose Mode Off:
Entry Created
Output field:
Field Description
Profile Id
Rate limiter's configuration profile identifier,
whichuniquely identifies the configuration profile.
The configuration profile contains all parameters
required for rate limiting algorithm to operate.
Level
Level of the rate limiter identifies whether the
algorithm executes in terms of number of packets
or number of bytes.If the 'level' is 'packet'(1), rate is
configured in terms of packets per second and
burst size is configured in terms of number of
packets.If the 'level' is 'byte'(2), rate is configured
in terms of bits per second and burst size is
configured in terms of number of bytes.
Type
Type identifies the algorithm for rate limiting.The
sr2cm (single rate two color marker) is a
single-rate algorithm. It takes rate and burst size
as input parameters.The trtcm (two rate three color
marker) is a dual-rate algorithm. It takes two sets
of rate and burstsize as inputs, one each for peak
and committed information.
Rate
This field defines the committed information rate. If
'level' is 'packet'(1), the unit is packets per second.
If 'level' is 'byte'(2), the unit is bits per second.
Max Burst Size
This field defines the committed burst size. If 'level'
is 'packet'(1), the unit is number of packets. If
'level' is 'byte'(2), the unit is number of bytes.
Peak Rate
This field is relevant only if 'type' is 'trtcm'(2). This
field defines the peak information rate. If 'level' is
'packet'(1), the unit is packets per second. If level