Filter
Top Products
E – 27
Selection of Aspect Ratio (i.e., Ratio of Screen Width to Screen Height)
ASPECT
Press the ASPECT button and select the
desired aspect ratio.
Full
Aspect
S-VIDEO
16:9(LB)
16:9
Real
Thru
Full
Aspect
16:9(LB)
16:9
Real
Thru
S-VIDEO
Full
Auto
Aspect
16:9
Thru
DVI
[VIDEO, S-VIDEO, YCbCr and YPbPr Input Selection]
[RGB, DVI Input Selection]
Aspect Selection Display
A press of the button will display the aspect selection
display.
The aspect ratio is the ratio of the width and height of the
screen.
Press the ASPECT button while the aspect selection display is shown and make the selection.
Each press of the button moves the cursor and switches the aspect ratio.
Also the selection can be made with the cursor (̆̄) buttons.
A diagram of the a sample image with different aspect ratios is carried on the next page.
The aspect selection display will remain for a while before disappearing.
To change the duration of the display, see → Page E-41 "On-Screen Display Duration Setting."
Note:
* The aspect ratio selection display will not
appear unless a signal is input. Play the
video of the equipment.
* Match the aspect ratio of the image of the
connected equipment with the aspect ratio
of the projected image of this unit, or ad-
just the image of a 16:9 aspect to the de-
sired format.
* When the aspect ratio differs, a circle, for
example, will be projected as an ellipse.
* The selected aspect ratio for each input is
stored.
Operation with the Remote Control
Cursor: Displays the currently selected
contents position.
Automatic Adjustment of the Input Signal
This automatically adjusts the projected RGB sig-
nal to an optimum condition.
Only the RGB, DVI and YPbPr (480p) signals can
be automatically adjusted.
Holding down the SET button for more than 1 second starts
the automatic adjustment.
During the adjustment, [AUTO] is display at the center of the
screen.
When the menu is displayed, the button that is associated with
the menu item will be operational; therefore, press the ESC
button to close the menu before making this adjustment.
Note:
* This automatically adjusts the stripe pat-
terns, color infidelity, and flicker which arise
from pixel shift.
When proper adjustment cannot be ob-
tained with automatic adjustment upon
pressing the SET button, please adjust
manually.
See E-35 "Adjusting the Clock Frequency
of the Input Signal" and "Adjusting the
Phase of the Input Signal".
SET