Filter
Top Products
E – 50
Specifications
Model Name HE-3200
Display Method Single Chip Digital Micromirror Device (DMD
TM
)
DMD Panel 0.7"
508,800 pixels (848ן600)
Lens Manual zoom, Manual focus
F=3.0 – 3.3 f=21.5 – 25.8mm
Lamp 130W High Performance Compact Lamp
Image Size Min. 32" (Throw distance 1.2m / 3.9 feet : Tele) Max. 200" (Throw distance 6.4m / 20.9 feet : Wide)
Color Reproduction Full color, 16.7 million colors simultaneously
Light Output 450 ANSI lumens (normally white)
Contrast Ratio 700:1 (Full on/off)
Scanning Frequency Horizontal : 15 – 85 kHz
Vertical : 50 – 85 Hz
Functions Zoom (Manual), Focus (Manual), Projection angle, Source select (S-Video/Video/YCbCr/YPbPr/RGB/DVI),
Aspect, Standby On/Off, Projection orientation, Digital keystone correction, Brightness, Contrast, Color,
Tint, Sharpness, Color temperature, Gamma correction, RGB signal automatic position and phase adjustment
Digital RGB Input T.M.D.S-compliant (single link only)
Input Terminal DVI-D 24 pinן1
RGB Signal VGA : 640ן480 Throughput image / Magnified image
S-VGA : 800ן600 Throughput image
XGA : 1024ן768 Throughput image / Compressed image
Analog RGB Input Separate signal system
Video signal Analog : 0.7Vp-p / 75Ω
Sync signal Separate : TTL Level (Positive / Negative)
Input Terminal RGB Mini D-Sub (15 pin)
RGB Signal VGA : 640ן480 Throughput image / Magnified image
S-VGA : 800ן600 Throughput image
XGA : 1024ן768 Throughput image / Compressed image
Video Input Composite, S-Vide, Component (YCbCr)
Color System NTSC 3.58, NTSC 4.43, PAL, PAL N, PAL M, PAL60, SECAM
Video signal Composite : 1.0Vp-p/75Ω
S-Video : Y (1.0Vp-p/75Ω), C (0.286Vp-p/75Ω)
Component : Y-signal (1.0Vp-p / 75Ω), Cb, Cr signal : 0.7Vp-p (75Ω)
Input Terminal Composite : RCAן1 (Shared with comonent-Y)
S-Video connector : Mini DIN 4 pin
Component : RCAן3
DVT Input Component (YPbPr)
Video signal Y signal : 1.0Vp-p / 75Ω, Pb, Pr signal : 0.7Vp-p / 75Ω
Input Terminal RCAן3 (Shared with YCbCr)
DVT Input 480p, 576p, 720p, 1080i
Horizontal Resolution NTSC : 400 lines or more
Environment Operating temperature : 5 – 35°C / 41 – 95°F, 30 – 85% humidity (no-condensing)
Storage temperature : –10 – 60°C / 14 – 140°F, 10 – 85% humidity (no-condensing)
Power Requirement 100 – 240V AC, 50 / 60Hz
Input Current 2.0A
Power Consumption 200 W (STANDBY 18W)
Dimensions 235 (W)ן91 (H)ן198 (D) mm (not including protrusion)
9.3 (W)ן3.6 (H)ן7.8 (D) inch (not including protrusion)
Weight Approximately 2.0kg / 4.4 lbs
Regulations UL Approved (UL 6500, CSA-E60065)
Meets FCC Class B requirements
Meets EMC Directive (EN55022, EN55024)
Meets Low Voltage Directive (EN60065)
The specifications are subject to change without notice.
Digital Micromirror Device
TM
(DMD
TM
) by Texas Instruments