Filter
Top Products
8. SETTINGS
All the settings can be modified in Polar WebSync software and transferred onto your training computer
with DataLink data transfer unit. For more information, see WebSync Help.
Sport Profile Settings
There are four different sport profiles set on as default in the Polar RCX5 training computer.
To modify sport profile settings select SETTINGS > Sport profiles.
You can create new sport profiles and modify the settings with Polar WebSync software and transfer them onto
your training computer with DataLink data transfer unit. For more information, see WebSync Help.
Running Settings
To view or modify sport profile settings for running select SETTINGS > Sport profiles > Running
• Training sounds > Select training sounds > Off, Soft, Loud or Very loud
• Heart rate transmitter > On, Off or Search new
• GPS sensor > On, Off or Search new
• Stride sensor > On, Off or Search new
• Stride sensor calibration > Calibrate > By running or Set factor
Stride sensor calibration is visible only if stride sensor has been set On previously.
• Speed View > Select speed view > Kilometers per hour or Minutes per kilometer or if you have chosen
imperial units select Miles per hour or Minutes per mile
• HeartTouch > Off, Activate back light, Change training view, Show limits, Show time of day or Take lap
• Automatic lap > On or Off. If you set the automatic lap On, Set automatic lap distance is displayed. Set
the distance in kilometers or miles.
• Set reminder > On or Off
Reminder is visible only if it has been set with a PC. For more information on setting the reminder, see
polarpersonaltrainer.com Help.
• Set training views Select, for example, Training view 1 (there are six separate training views) and set the
training view Off, On, or Modify. Each training view can be modified to suit your training purposes.
Set training views Select Training view 1 Modify >
OK
The first row starts blinking.
Select the desired information
with UP/DOWN and confirm with
OK. Repeat until all the four
rows are modified.
Repeat this until all six training
views are set Off, On or you have
modified them.
Training view numbering Set view numbering > Off or On Training view numbering On/Off
is displayed.
Restore default views Press OK > Restore default
views YES/NO? is displayed.
Select YES/NO with UP/DOWN. If
you select YesDefault views
restored is displayed.
• Show in pre-training mode? Select YES, Sport shown in pre-training mode is displayed. The sport will be
ENGLISH
Settings 27