Filter
Top Products
KIRK Wireless Server 6000 Installation and Configuration Guide
12–2
Connecting a Computer to the KIRK Base Station
The base station communicates with the computer either through a cross-over
patch cable or through a network with identical net mask, e.g. the IP address:
192.168.0.2 and Sub-net mask: 255.255.255.0.
Figure 12-1 Cross-Over Patch Cable (RJ45)
1 Connect the LAN cable or cross-over patch cable to the computer.
2 Connect the LAN cable or cross-over patch cable to the ethernet
connector at the bottom of the base station.
Note
The LAN port of the base station is a RJ45 connector.