Filter
Top Products
KIRK Wireless Server 6000 Installation and Configuration Guide
17–6
Safety
WARNING!
Only qualified service personnel may install this equipment. The instructions in
this manual are intended for use by qualified service personnel only.
Only qualified persons should service the system.
The installation and service of this hardware is to be performed only by service
personnel having appropriate training and experience necessary to be aware of
hazards to which they are exposed in performing a task and of measures to
minimize the danger to themselves or other persons.
Electrical shock hazards from the telecommunication network and AC mains
are possible with this equipment. To minimize risk to service personnel and
users, the system must be connected to an outlet with a third-wire Earth.
Service personnel must be alert to the possibility of high leakage currents
becoming available on metal system surfaces during power line fault events
near network lines. These leakage currents normally safely flow to Protective
Earth via the power cord. Therefore, it is mandatory that connection to an
earthed outlet is performed first and removed last when cabling to the unit.
Specifically, operations requiring the unit to be powered down must have the
network connections (exchange lines) removed first.