Filter
Top Products
Installing KIRK Repeater
6–7
Note: The external antenna used for the transmitter is to be
fixed-mounted on indoor permanent structures providing a separation
distance of at least 20 cm / 8 inches from all persons during normal
operation and must not be co-located or operating in conjunction with
any other antenna or transmitter. The maximum radiated output power is
1W e.i.r.p. For more information and technical support, please refer to
www.polycom.com.
Recording the Installation Information
After completing the installation of the repeaters, record the location of each
repeater.
Checking Indicators
Verify that the repeater LED indicator is continuously on, indicating that the
repeater is functional.
Powering the KIRK Repeater
Power Options
The power supply for the repeater is 9VDC, 300mA.
Programming a KIRK Repeater with the KIRK
Programming Kit
This section provides information about:
• “Content of the KIRK Programming Kit Repeater” on page 6-7
• “Set up of the Hardware for Repeater Programming” on page 6-8
• “Programming the KIRK Repeater with the ServiceTool” on page 6-9
Content of the KIRK Programming Kit Repeater
The Programming Kit Repeater (Part no. 02319508) consists of: