Filter
Top Products
Installation
ConnectUPS Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com
7
LED Description
The functions of the ConnectUPS Web/SNMP Card are
indicated by the Status and either the 10 Mb or 100 Mb LEDs,
as listed in Table 1.
Table 1. LED Definitions
Status LED 10 Mb or
100 Mb LED
Card Function Description
Flickering On/Flickering Normal operation with Ethernet traffic
On On ConnectUPS Web/SNMP Card error
Off Off UPS power low (no power to the
ConnectUPS Web/SNMP Card)
Flashing Flashing No connection to UPS (alternate flashing as
the ConnectUPS Web/SNMP Card restarts)
Configuration
You must configure the ConnectUPS Web/SNMP Card before
you can use it. There are two ways to configure the card:
:
locally through the serial communication port
:
remotely using a Web browser or Telnet utility
Configuring the Card Locally
The card has a configuration program that you can access by
using the supplied serial cable to connect the card to a terminal
or a computer with a terminal emulation program.
If you choose to configure your card locally, see “Local
Configuration” on page 9.