Filter
Top Products
Local Configuration
ConnectUPS Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com
14
Set the IP Address, Gateway Address and MIB System
Group
Use this function (option 1) to set the IP address, the gateway
address, or the management information base (MIB)
parameters of the card, as listed in Table 2.
Table 2. Parameters with Examples
No. Function Description Example
1 IP Address IP address of the card 192.72.173.188
2 Gateway
Address
Default IP address of the network gateway 192.72.173.254
3 Network Mask Subnet mask setting 255.255.255.0
4 sysContact System contact string of MIB (up to 127
characters)
Powerware
5 sysName System name parameter for MIB (up to 127
characters)
ConnectUPS Web/SNMP
Card
6 sysLocation System location parameter for MIB (up to
127 characters)
TEST LAB
Set Web/SNMP Card Control Group
For those users who intend to use BOOTP/DHCP, Telnet, or
secure HTTP in order to configure, control, update, or manage
the card, certain control parameters must be enabled or
disabled. Use this function to modify those parameters
(option
2).
NOTE To prevent unauthorized viewing of the Web pages presented by
the ConnectUPS Web/SNMP Card, use this function to enable HTTP
Security Control.
NOTE To obtain an IP address using BOOTP/DHCP (instead of serial
configuration), set DIP Switch 2 on the front panel to the ON position (OFF
is the default).