Filter
Top Products
Local Configuration
ConnectUPS Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com
12
3. Change any other options as needed for your
particular configuration by typing the corresponding
number shown in the menu (
2 through 10). Each
setting is described in the following sections.
4. Type
0 to return to the Main Menu.
5. Type
0 to exit the ConnectUPS Web/SNMP Card
configuration. The ConnectUPS Web/SNMP Card
automatically saves all settings after exiting the
configuration function (see Figure 7).
NOTE The ConnectUPS Web/SNMP Card may take up to two minutes to
establish communication with the UPS. Please wait before attempting
communication with the card from a Web browser or network management
system (NMS).
NOTE
Telnet Operation – Once the card is reachable on the network, you
can use a Telnet utility to adjust any of the configuration settings. The
menus are identical to those seen during serial configuration and are
password-protected for Superuser access only.