Filter
Top Products
Local Configuration
ConnectUPS Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com
16
Set UPS Information
Use this function to enter additional information about the
UPS including date of installation and date of last battery
replacement (option
7). In addition, set timing values relating
to the shutdown and restart of the UPS via this function. This
information is accessible via the HTTP interface for easy
modification after the card is on the network.
Set Superuser Name and Password
Use this function to set or change the user name and password
of the administrator who will use a Web browser to configure
the ConnectUPS Web/SNMP Card (option
8).
Email Notification
Use this function to inform selected e-mail accounts of events
and changes in the status as they occur in the UPS or to
provide a daily status message at a predetermined time
(option
9). This information is accessible via the HTTP
interface for easy modification after the card is on the network.
Set Website Links
Use this function to set links to different Web sites (option 10).
Links appear on the Web pages of the ConnectUPS Web/SNMP
Card. This information is accessible via the HTTP interface for
easy modification after the card is on the network.
Back to Main Menu
Type 0 to return to the Main Menu screen (see Figure 7 on
page 13).