Filter
Top Products
Local Configuration
ConnectUPS Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com
15
Set Write Access Managers
For those users who intend to use an SNMP-compatible NMS
to manage the ConnectUPS Web/SNMP Card, the IP address of
the management station must be added to the list on the
ConnectUPS Web/SNMP Card in order to receive read (get) or
write (set) access rights. Community strings may be different
for read or write access. Use this function to add or delete the
IP address of the management station (option
3).
Set Trap Receivers
For those users who intend to use an SNMP-compatible NMS
to manage the ConnectUPS Web/SNMP Card, the IP address of
the machine intended to be the trap receiver must be added to
the list on the ConnectUPS Web/SNMP Card. Use this function
to add or delete the IP address of the trap receivers (option
4).
This information is accessible via the HTTP interface for easy
modification after the card is on the network.
Set IP Addresses of Primary and Secondary Date Server
Use this function to set the IP addresses of the primary and
secondary date servers (option
5). This information is
accessible via the HTTP interface for easy modification after
the card is on the network.
Computer systems with the ConnectUPS Web/SNMP
Card-compatible NetWatch client software are periodically
monitored by the ConnectUPS Web/SNMP Card to maintain a
consistent date and time with your network. The computers’IP
address must be listed as the Primary or Secondary Date
Server.
UPS Event Actions
Use this function to configure actions that the ConnectUPS
Web/SNMP Card performs during AC Fail and Low Battery
events (option
6). This information is accessible via the HTTP
interface for easy modification after the card is on the network.