Filter
Top Products
Chapter 5: Management with WebPAM PRO
121
Managing Enclosures
This function of WebPAM PRO does not apply to the SuperTrak RAID controller
card installed in the Host PC, except for one item:
• Viewing Enclosure Information (page 121)
Viewing Enclosure Information
Enclosure information includes:
•Enclosure ID
• Enclosure Type – Virtual
• SEP Firmware Version
• Maximum number of Controllers, Physical Drive Slots, Fans, Blowers,
Temperature Sensors, Power Supply Units, Batteries, and Voltage Sensors.
This information might be useful when contacting Technical Support.
To view Enclosure information:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
The Enclosure information appears on the Information tab.
See “SAS Connections and ID Numbers” on page 12,
“Viewing Controller Information” on page 115,
“Viewing Battery Information” on page 118, and
“Contacting Technical Support” on page 197.
Note
In addition to the SuperTrak EX Series, WebPAM PRO also
supports Promise Subsystems.
For more information about managing those products with
WebPAM PRO, see the online help or refer to the Subsystem’s
Product Manual.