Filter
Top Products
83
Chapter 5: Management with WebPAM PRO
• Logging into WebPAM PRO (page 83)
• Accessing the Interface (page 86)
• Managing Users (page 92)
• .Working with Subsystem/Host Management (page 96)
• Managing Software Services (page 99)
• Managing the Host (page 103)
• Managing the Subsystem (page 104)
• Managing the Controller (page 115)
• Managing Enclosures (page 121)
• Managing Physical Drives (page 122)
• Managing Disk Arrays (page 127)
• Managing Logical Drives (page 143)
• Managing Spare Drives (page 149)
• Working with the Logical Drive Summary (page 153)
This chapter describes using WebPAM PRO to monitor and manage your RAID
system. This chapter is divided into sections for major WebPAM PRO
components as shown above.
Logging into WebPAM PRO
You can log into WebPAM PRO in either of two ways:
• Logging in at the Host PC (page 83)
• Logging in over the Network (page 83)
Logging in at the Host PC
At the Host PC (where the SuperTrak EX Controller is installed), to log into
WebPAM PRO, do one of the following actions:
• Double-click the WebPAM PRO desktop icon.
• Choose WebPAM PRO in the Windows Programs menu or the Linux
Applications menu.
• Follow the steps under “Logging in over the Network”.
Logging in over the Network
You can log into WebPAM PRO from any PC with a network connection to the
Host PC (where the SuperTrak EX Controller is installed).