Filter
Top Products
Chapter 2: Installation
29
Installing WebPAM PRO onto a Linux PC or Server
If you have a previous version of WebPAM PRO installed on your PC or server,
remove it now, before you install the current version of WebPAM PRO.
Follow these steps to install WebPAM PRO on your Linux-based PC or Server.
1. Boot the PC or server, log in as root, and launch the Linux GUI.
If the computer is already running, exit all programs. If you are not logged in
as root, log out, then log in again as root.
2. Insert the Software CD into your CD-ROM drive.
3. Open a Terminal window, then go to /media/cdrom/ and search for the
WebPAMPRO...Linux.bin file.
4. Type sh followed by the exact name of the WebPAMPRO...Linux.bin file,
then press Enter.
After several moments, the first WebPAM PRO installation dialog box
appears.
5. In the Introduction dialog box, click the Next button to proceed with
installation.
Figure 16.Introduction dialog box